Can you jack up a travel trailer by the axle?

11
Ezequiel Schowalter asked a question: Can you jack up a travel trailer by the axle?
Asked By: Ezequiel Schowalter
Date created: Mon, Apr 19, 2021 5:55 PM
Date updated: Tue, Jun 28, 2022 2:14 PM

Content

Top best answers to the question «Can you jack up a travel trailer by the axle»

It is best to place the jack underneath the axle, and to only jack up the trailer until the trailer's weight is off the tire. If you need to make any other repairs, place the jack near where you need to work, using the frame or the axles (they are the strongest points underneath the trailer).

Yes, you can jack up a travel trailer by the axle and many people do this all the time. The axle may be one of the easiest locations to use to get the clearance you need. However, with today's axle designs and components, it may not be the best place to jack up your travel trailer.

FAQ

Those who are looking for an answer to the question «Can you jack up a travel trailer by the axle?» often ask the following questions:

❔ How do you jack up a travel trailer to change tires?

To jack up a travel trailer to change a tire, you will need a bottle jack, ramp if dual axle, or other automotive jack. Start by chocking the wheel on the opposite side, sliding the jack under the frame near the tire to be changed, and jack it up. This will allow you to remove the tire to replace.

❔ How do you jack up a travel trailer?

  • When you are finished with the job, position and then lift up the jacks next to the jack stands underneath the trailer, take the stands out, then slowly bring each of the jacks down. You can then take the wheel chocks or other stopping devices off.

❔ How to safely jack up a travel trailer-rv travel?

  • —David L. In my shop, if I couldn’t get the entire RV onto a hoist, I would only jack one side of the trailer at a time. Perform the service at each axle on that one side, then move to the other side. I would jack only on the main frame rail and allow the suspension to hang until both tires were clear of the shop floor.

❔ How to straighten a travel trailer axle?

About Press Copyright Contact us Creators Advertise Developers Terms Privacy Policy & Safety How YouTube works Test new features Press Copyright Contact us Creators ...

❔ Is a single axle travel trailer safe?

Single axle travel trailers are safe to tow and have been in use for many years. The drawbacks of a single axle trailer are its cargo carrying capacity, braking distance, and if you have a blow out. Single axle trailers can maneuver better than its double axle counterpart. Tandem axle travel trailers are the safer of the two but this does not ...

❔ Is it safe to jack up a dual axle travel trailer?

  • However, even though flat tires are less common with dual axle travel trailers, you have to prepare yourself in the event that it does happen. Learning how to jack up a dual axle travel trailer the right way is important not just so you can do it safely, but also so that you can do it quickly and get right back on the road.

❔ Is it safe to jack up a travel trailer?

  • Then simply repeat the process on the other side. For any RV being raised up with a floor jack, it’s much safer to always have at least two tires (or one side) safely on the ground at all times. Remember, safety first – the time element, second! Read more from Gary Bunzer at the RVdoctor.com.

❔ What is a single axle travel trailer?

  • A single axle trailer has one axle with a wheel connected on each end, while a tandem axle has two axles that are in close proximity of each other to help disperse the weight load of the cargo evenly. The single axle is either attached directly on the trailer bed with clamps or supporting hardware or with springs.

❔ What is the best jack for a travel trailer?

Recommended Jack for Trailer to Change a Flat Tire For a jack to use in an emergency to change a flat tire I recommend using the Powerbuilt Bottle Jack #ALL620471. This jack has a lift range of 11" to 21" and a 6,000 lb capacity which is more than enough for your camper trailer.

9 other answers

Yes, you can jack up a travel trailer by the axle and many people do this all the time. The axle may be one of the easiest locations to use to get the clearance you need. However, with today’s axle designs and components, it may not be the best place to jack up your travel trailer.

How do I jack up a dual axle travel trailer? Use a jack that will fit under the axle even with a flat tire, you can then jack it up high enough to change the tire. If you try to jack up the whole trailer by the frame or the center of the axles getting both axles off the ground it will take a stronger jack with a higher lift.

Can you jack up a travel trailer by the axle?, Do Not jack it up on any part of the axle tube as your camper is a torsion style axle and could be damaged. The use of jack stands is always a could safety practice.. In additional, Where do you put the jack on a tandem axle trailer?, The safest place to jack (IMHO) is under the U-bolt plate, under the spring, just behind the wheel.

If you’re suspicious, don’t waste any time getting the bearing inspected – a trailer wheel rolling off into oncoming traffic is a sight you won’t soon forget. Jack the frame, not the axle, and you’ll spend a lot less on alignments or tire replacements. ##RVT834

However, facing problems while traveling with a trailer is common. Although it is not very common in dual axle trailers, many travelers encounter the issues of a flat tire. If you are a frequent traveler, then you should know the solutions and tips to jack up the trailers.

However, even though flat tires are less common with dual axle travel trailers, you have to prepare yourself in the event that it does happen. Learning how to jack up a dual axle travel trailer the right way is important not just so you can do it safely, but also so that you can do it quickly and get right back on the road.

Perform the service at each axle on that one side, then move to the other side. I would jack only on the main frame rail and allow the suspension to hang until both tires were clear of the shop floor. I would then lower that side onto appropriate (read: weight capable) safety jack stands. Then simply repeat the process on the other side.

Never jack up your travel trailer’s axle tube as you can cause permanent damage. Make sure to watch your brake lines as to not place the jack under to crunch any working parts of your unit. Once the jack is in the proper position you can raise your travel trailer until the flat tire is off of the ground.

What they really mean is don't jack under the center of the axle as you could bend it. The safest place to jack (IMHO) is under the U-bolt plate, under the spring, just behind the wheel. After all, this is where the weight of the trailer actually transfers to the axles. Done mine for years on this spot and never a problem.

Your Answer

We've handpicked 6 related questions for you, similar to «Can you jack up a travel trailer by the axle?» so you can surely find the answer!

What kind of jack goes in a travel trailer?

Bottle Jack and Safety Stands for Use During Trailer Maintenance A bottle jack like the Powerbuilt #ALL620471 is the right type of jack to use for changing and rotating tires and other trailer maintenance work. But using wood blocks will reduce the stability of the jack and affect the safety of that process.

What size is a travel trailer stabilizer jack socket?

I went out to the warehouse to measure the drive nut on the Scissor Stabilizer Jacks # TJSCHD-24. From wrench flat to wrench flat it is 0.72 inches so just a hair under 3/4 inch and just a hair above 18mm. expert reply by: Michael H Ask The Experts a Question >>

What's the best way to jack up a travel trailer?

It is best to place the jack underneath the axle, and to only jack up the trailer until the trailer's weight is off the tire. If you need to make any other repairs, place the jack near where you need to work, using the frame or the axles (they are the strongest points underneath the trailer).

Where does the jack go on a travel trailer?

It is best to place the jack underneath the axle, and to only jack up the trailer until the trailer's weight is off the tire. If you need to make any other repairs, place the jack near where you need to work, using the frame or the axles (they are the strongest points underneath the trailer).

Where is jack on travel trailer?

Perform the service at each axle on that one side, then move to the other side. I would jack only on the main frame rail and allow the suspension to hang until both tires were clear of the shop floor. I would then lower that side onto appropriate (read: weight capable) safety jack stands. Then simply repeat the process on the other side.

Where to place the jack on a travel trailer?
  • It is best to place the jack underneath the axle, and to only jack up the trailer until the trailer's weight is off the tire. If you need to make any other repairs, place the jack near where you need to work, using the frame or the axles (they are the strongest points underneath the trailer).